3.
Fill out the fields:
Host: The hostname or IP address of the RADIUS server
Port: Defines the RADIUS Port to use. The default RADIUS Port is 1812, but this can
be changed, as required.
Secret Key: The secret key which is shared by SecureSync and the RADIUS server
(the key is used to generate an MD5 hash).
Timeout: [seconds] Defines the Timeout that SecureSync will wait to communicate
with the RADIUS server e.g., 10 seconds.
4.
Click the Add Server button. A confirmation message The item has been added will be dis-
played if the server could be added, and the server will be added to the list, indicating
its status. The server status can be:
DISABLED: RADIUS service is disabled.
UNREACHABLE: This RADIUS server cannot be reached.
REACHABLE: This RADIUS server can be reached.
5.
To remove a RADIUS server from the list, click the X-button in the Actions column.
Note: SecureSync supports multiple RADIUS servers. The system performance, how-
ever, will be negatively affected by a large number of servers or invalid servers,
respectively.
264
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.3 Managing Users and Security
To Next Page
Loading...
