Spectracom SecureSync User Manual

The Upgrade Log panel
The upgrade log is a running log of system upgrades, used for historical and troubleshooting
purposes. It can be expanded by clicking on the DIAGONAL ARROWS icon in the top-right
corner:
Each log entry is comprised of a unique ID, the date the entry was created, the originator of the
entry, and the actual message. Refresh the log by clicking the CIRCLE ARROWS icon in the top-
right corner. Go to the First, Last, or Previous entries by clicking the corresponding buttons in
the bottom-right corner.
The Disk Status panel
The Disk Status panel provides information on the Compact Flash card memory usage. This
information is relevant for troubleshooting purposes, and when preparing the system for a soft-
ware update.
The Software Versions panel
This panel provides version information on the different SW components utilized by the system.
4.7.2.2 Saving the System Configuration Files
To save (backup) the system configuration files:
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the Actions panel, click the Save Configuration button.
4.7 Resetting the Unit to Factory Configuration
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
325

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)