1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
The System Configuration screen will display:
The System Configuration screen consists of 5 panels:
The Actions panel
The Actions panel is used for updating the system software, managing license files, saving and
restoring the configuration files, and restoring the factory defaults.
The System Configuration panel
The System Configuration panel provides the following information:
System—The model name of this unit, and the software version currently installed.
Model—The model number of this unit.
Serial Number—The serial number of this unit.
Power Supply—The type of power supply installed in this unit. This can be AC, DC or
both.
Oscillator—The type of internal timing oscillator installed in this unit.
GNSS Receiver—The GNSS receiver in use with this unit.
HW Slots 1–6—The Option Cards installed in this unit.
324
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.7 Resetting the Unit to Factory Configuration
To Next Page
Loading...
