Spectracom SecureSync User Manual

3.
Click OK in the grey confirmation window that displays.
4.
Save the configuration file to a directory where it will be safe. SecureSync sim-
ultaneously saves a file at
/home/spectracom/xfer/config/SecureSync.conf.
4.7.2.3 Uploading Configuration Files
To upload configuration files from a PC:
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the Actions panel, click the Upload Configuration button.
3.
Click Choose File in the window that displays, and navigate to the directory on your PC
where the bundled file is stored.
326
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.7 Resetting the Unit to Factory Configuration

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)