Spectracom SecureSync User Manual

4.3.2.1 Configuring Password Policies
To configure password requirements e.g., rules for minimum password length and special char-
acters:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel, click Security Policy.
3.
The Password Security window will display. Fill in the self-explanatory fields and click
Submit.
4.3.2.2 The Administrator Password
The factory default administrator login password value of admin123 can be changed from the
default value to any desired value. If the current password is known, it can be changed using
the SecureSync WebUI.
252
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.3 Managing Users and Security

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)