Spectracom SecureSync User Manual

3.
Enter the IP address or host server name (e.g., “MyDomain.com”) you want to use as a
remote log server.
4.
Click the Submit button.
5.
Your remote log server will appear in the Remote Log Server panel, and as a SERVER
NAME in any Log File configuration screen:
6.
Once a remote log server has been setup successfully, do not forget to configure the logs
to be sent to the remote server, see "Configuring Logs" on page313.
Changing or deleting a remote log server:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
316
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.5 Quality Management

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)