UTC: Coordinated Universal Time ("temps universel coordonné"), also referred to
as ZULU time
TAI: Temps Atomique International
GPS: The raw GPS time as transmitted by the GNSS satellites (as of July, 2015,
this is 17 seconds ahead of UTC time)
Offset: Provides the ability to account for HAVE QUICK cable delays or other
latencies in the HAVE QUICK outputs. The Offset values are entered in nano-
seconds (ns). The available Offset range is –500 to +500 ms.
HAVE QUICK Input: Status Window
To view the current settings of the HAVE QUICK Input (also referred to as ‘Reference’), go to its
Status window. For instructions, see: "Viewing Input/Output Configuration Settings" on
page347.
The Web UI list entry for this card is: HAVE QUICK In/Out.
The input is named: HQ Input [number].
Note: SecureSync starts numbering I/O ports with 0 (only 1PPS and 10MHz out-
puts start at1, because of the built-in outputs).
The Status window displays the following settings:
Reference ID: Indicates the letters used in the Input Reference Priority table for this par-
ticular input reference.
SecureSync User Reference Guide 451
APPENDIX
To Next Page
Loading...
