Spectracom SecureSync User Manual

PTP Grandmaster [-32]: Specifications
Inputs/Outputs: (1) Configurable as Input or Output
Signal Type and Connector: Ethernet via SFP, and 1PPS Output via BNC
Management: Web UI
Resolution: 8ns (±4ns) packet time stamping resolution
Accuracy: 30ns accuracy (3σ) Master to Slave, via crossover cable
Network Speeds: 100 Mb/s, or 1Gb/s, depending on SFP module used
PTP Version supported:PTP2 (IEEE 1588-2008)
PTP Profiles supported: Default, Telecom, Enterprise
Transmission modes: Unicast [default], Multicast
Maximum Number of Cards: 6
Ordering Information: 1204-32: PTP/Precision Timing Protocol Option Module
Figure 5-54: Model 1204-32 option card rear plate
PTP Grandmaster [-32]: Edit Window
1.
To configure this option card, go to its Edit window. For instructions, see "Configuring
Option Card Inputs/Outputs" on page348.
470 SecureSync User Reference Guide
APPENDIX

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)