The Network Services panel has ON/OFF toggle switches for the following daemons and fea-
tures:
System Time Message: A once-per second Time Message sent out via Multicast; for
details, see "System Time Message" on page93.
Daytime Protocol, RFC-867: A standard Internet service, featuring an ASCII daytime rep-
resentation, often used for diagnostic purposes.
Time Protocol, RFC-868: This protocol is used to provide a machine-readable, site-inde-
pendent date and time.
Telnet: Remote configuration
FTP server: Access to logs
SSH: Secure Shell cryptographic network protocol for secure data communication
HTTP: Hypertext Transfer Protocol
HTTPS: Hypertext Transfer Protocol Secure
Classic UI: This toggle switch allows the SecureSync Classic User Interface (as used in
SecureSync Web UI Version 5.0.2 and older) to be turned ON or OFF [Default = OFF].
To enable, select the ON position, and refresh the browser window (the refresh may
take a moment). Then click the CLASSIC INTERFACE button that will appear in the top
right hand corner to switch to the Classic UI. The Classic UI is accessed via the non-stand-
ard port 8080 (e.g., https://10.10.122.32:8080).
Note that 3rd party security scan tools may report a security issue if the Classic UI is
ON.
To enable/disable the Classic UI via the CLI (e.g., when using an older browser that
does not support the current UI, use the commands servget and servset.
2.13 Configuring Network Settings
CHAPTER 2 • SecureSync User Reference Guide Rev. 26
61
To Next Page
Loading...
Need help?
General
