Circle runout Limit
Main journal taper and out–of–round Limit
Crank pin journal taper and out–of–round Limit
for 12 pointed head (l st)
(2nd)
(3rd)
for 6 pointed head
TORQUE SPECIFICATIONS
Main bearing center wall thickness (Reference)
Thrust washer thickness
Main journal oil clearance
Timing belt tensioner x Fan bracket
Camshaft timing pulley x Camshaft
Main journal diameter (Reference)
Generator bracket x Cylinder head
No.1 idler pulley x Cylinder head
Exhaust manifold x Cylinder head
Water outlet x No.2 idler pulley
Crankshaft pulley x Crankshaft
Cylinder head x Cylinder block
Cooling fan x Fluid coupling
Fan bracket x Cylinder block
Spark plug x Cylinder head
Main journal diameter
Crank pin diameter
Thrust clearance
Part tightened
Limit
STD
Crankshaft
STD
Limit
–ENGINE ENGINE MECHANICAL
EG2–138
To Next Page
Loading...
