Xerox Phaser 790 Documentation

Replacing the Copy/Print Cartridge 24. Maintenance
Xerox Phaser 790 24-9
7. Place the Copy/Print Cartridge on several sheets of used paper.
WARNING
NEVER dispose of a used Copy/Print Cartridge in an open flame. Dry Ink
could explode and cause burns.
8. Install the Copy/Print Cartridge:
a. Remove the Copy/Print Cartridge from the box.
b. Tear open the notched end of the silver protective bag and remove
the cartridge.
301081b
CAUTION
DO NOT touch the blue surface of the drum. If the drum is scratched, or
contaminated with oil from your hand, the output can be degraded.
c. Hold the cartridge by the handle. While keeping the cartridge level,
remove the protective foam wrap.
301036c

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English