Xerox Phaser 790

Installing the Duplex Tray 1. Setting up the Phaser 790
Xerox Phaser 790 1-33
Installing the Duplex Tray (optional)
The Duplex Tray enables the Phaser 790 to print two-sided output.
1. Open the Duplex Tray box and remove the contents:
• Duplex Tray
• Upper Inverter
• Lower Inverter
• Two Thumb Screws
• Small Connector Cover with cutout
• Special Tool
2. Remove the Duplex Tray from the plastic wrap and remove any packing
in the tray.
301043b
3. Open Paper Tray 1.
301128A-WOL
0