Xerox Phaser 790

Adding memory to the Printer 1. Setting up the Phaser 790
Xerox Phaser 790 1-51
7. To replace the 64MB memory card perform the following steps:
a. In order to remove the 64 MB memory card press against the two
clips on the sides of the card slot with your thumbs.
b. When the clips are pushed back, remove the 64MB card.
301212a
c. Remove the new memory card from the anti-static bag.
d. Place the 64 MB memory card in the anti-static bag.
e. Slide the new memory card into the upper slot.
f. Using your thumbs, press the card into the slot until it clicks.
301213a
g. If you are installing a second card, slide it into the lower slot and
press it into place.
301214a