4 Teaching
4.4 Commands
4-29
HW1485509
HW1485509
Command Builder limits the number of variables, I/O, etc. that can be
modified. However, the commands generated by Command Builder can
be modified in the Job Contents view to use any variable and I/O.
6. The added command is displayed in the Job Contents view. Press the
{Detail Edit} icon to the right of the added line.
7. Other variables that were not listed in the Command Builder can also
be selected. Replace the variables to desired variables, if a triangle ▼
is being displayed next to the input, other items are available for
selection.
(Ex. R000 and R002)
8. Press {SAVE ALL}, and the command is modified.
To Next Page
Loading...
