8 System and YRC Controller Setting
8.2 Security Level Settings
8-4
HW1485509
HW1485509
8.2 Security Level Settings
Under Security Level Settings, the following items can be set:
Access
Startup Level
8.2.1 Access
The passcode for Security Access can be changed.
1. Select the security level from the drop-down list to change the
passcode.
2. Press the {SET PASSCODE}.
For more information on Security Access and its procedures, go to
chapter 1.17.5 “Security Level Settings”.
8.2.2 Startup Level
The Security Level at startup or restart can be set to Operation, Edit or
Management level. Startup Level can be modified by operating in
Management Level or higher.
1
2
To Next Page
Loading...
