4 Teaching
4.7 Monitoring Variables
4-58
HW1485509
HW1485509
4.7 Monitoring Variables
4.7.1 Monitoring Variables using Watch Window
User variables can be monitored using the Watch Window, placed under
{Program/Operate} in {MENU}. The following variables can be monitored.
Register Items on the Watch Window for Variables:
– Byte type variable (B-variable)
– Integer type variable (I-variable)
– Double integer type variable (D-variable)
– Real type variable (R-variable)
– String type variable (S-variable)
– Position type variable (P-variable)
To maximize each panel, press the expand icon on the right-hand side of
the title of variable, position and I/O. Press it again to change the panel
back to its original size.
The values shown in the Watch Windows are updated every second.
For using the Watch Window to monitor I/O signal, refer to
chapter 7.4.1 “Monitoring I/O Signals by I/O Monitor”.
To Next Page
Loading...
