3 Managing Jobs
3.1 Preparation for Teaching
3-2
HW1485509
HW1485509
3.1.1.1 Setting the Job Name
The following rules apply to the job name:
– 1 to 32 alphanumeric characters can be used.
– Job names may be written with numerals only.
– Only upper-case letters can be used for alphabets.
– Symbols include: !, &, (, ), ‘, - and _. Space cannot be used for a job
name. Use an underscore ( _ ) instead.
– Different types of characters can coexist within the same job name.
– If the job name is already used, an input error will occur.
<Examples>
001
JOB-1
WORK_A
3.1.1.2 Setting the Tag
The tag can be used to specify a group or category for a job. Sorting by
tag can help see all jobs in a certain group/category. For example, if a job
is tagged by workpiece name, or operator’s name, they will be grouped
together when sorting by tag name is used. Enter an optional tag value.
Constraints on tag name are:
– 0 to 32 alphanumeric characters can be used.
– Letters can only be entered in upper-case.
– Only the underscore ( _ ) and dash ( – ) can be used as a symbol.
1. Insert a tag.
For information on character input operation, refer to chapter 1.13
“Character Input Operation”.
2. Press {ENTER}.
To Next Page
Loading...
