4 Teaching
4.9 Teaching Coordinate
4-76
HW1485509
HW1485509
4.9.1 Changing Teaching Coordinate
Use the following steps to change Teaching Coordinate:
1. Select {Job List} under {MENU}
2. Select the particular job from the list of jobs.
3. Press the {Additional Settings} expansion icon at the bottom of the Job
Details panel.
Fig. 4-32: Additional Settings
– This pulls up a new panel for Additional Settings
Fig. 4-33: Additional Settings Panel
If Teaching Coordinate is not available on the system, this
control is grayed out and a notification explains why it is
unavailable when pressed
To Next Page
Loading...
