YASKAWA YRC1000 - 1.12 Status Bar

1 Smart Pendant
1.12 Status Bar
1-23
HW1485509
HW1485509
1.12 Status Bar
The Status Bar shows the YRC Controller status.
The following configuration can be accessed from the Status Bar:
Menu
Tool Number
Jogging Speed
Use this control to change the Jogging Speed.
Use this button to access the menu.
Use this control to change the current Active Tool in
MANUAL (TEACH) mode. The tool numbers are from
0 to 63. In AUTOMATIC (PLAY) mode, this button is
disabled.
Low Speed
Medium Speed
High Speed
Top Speed
1
2
3
46 of 493