3 Managing Jobs
3.3 Copying Jobs
3-6
HW1485509
HW1485509
3.3 Copying Jobs
This operation is used to copy existing jobs, which are then used to create
new jobs. It can be performed in the Job List.
On the Job List, select the job to be copied from the list.
1. Select {Job List} under {MENU}
– The Job List appears.
2. Highlight the job to be copied.
3. Press {DUPLICATE} on the Job Details panel.
– The duplicated job will be displayed on the Job List.
– The job is named with “-COPY” at the end of the original job name.
Fig. 3-2: Copying Jobs
• There is a maximum of ten copies for the same job. If
the limit has already been reached, duplication will fail,
and show an error message.
• Job names have a 32 character limit. If the job name is
longer than that, it will be shortened to 32 characters. If
a job with that shortened name already exists, the
duplication will fail and show an error message.
To Next Page
Loading...
