9 Utility
9.3 Backup and Restore
9-6
HW1485509
HW1485509
9.3 Backup and Restore
9.3.1 System Backup
System Backup screen allows the user to backup YRC Controller system
file and pendant files on to a USB drive plugged in to the pendant. This
function can be accessed from {Menu} {Utility} {Backup and Restore}.
Fig. 9-2: System Backup Screen
System Backup saves the following files:
• YRC Controller System Backup file (CMOS.BIN)
• CMOS.BIN is a binary file that includes all YRC Controller setting
parameters and data files. This file can be used to restore the
YRC Controller.
• Pendant files
• Pendant configuration files.
• Pendant log files.
Procedure for system backup is shown as follows.
1. Insert a USB drive into the pendant.
2. Make sure there is at least 40 MB free space on the USB drive.
3. If necessary, specify a target folder name. Backups will be created
inside this folder.
4. If necessary, enter a description for the backup.
5. Press {Backup System Data to Pendant USB}.
– A confirmation pop-up window will appear.
To Next Page
Loading...
