1 Smart Pendant
1.13 Character Input Operation
1-26
HW1485509
HW1485509
1.13 Character Input Operation
Tap on the data or text for which characters are to be input and the
software keypad will be displayed.
1.13.1 Character Input
There are two types of software keypads: alphanumeric keypads and
symbol keypads. To switch between the alphanumeric and symbol
keypads, tap the button on left top of the keyboard. To switch the
alphanumeric keypad between upper-case and lower-case characters, tap
the “Shift” key (marked with an upward arrow).
The cursor is moved by tapping {LEFT} and {RIGHT} on the top of the
keypad. Close the keyboard by tapping the keyboard icon.
Fig. 1-16: Keyboard for Switching Keypads and Moving the Cursor
Alphanumeric values and symbols to be input are limited to
certain content. When values cannot be input, the keys turn
gray and cannot be selected.
To Next Page
Loading...
