YASKAWA YRC1000 - 3.1.1.3 Setting the Comment

3 Managing Jobs
3.1 Preparation for Teaching
3-3
HW1485509
HW1485509
3.1.1.3 Setting the Comment
Comments are a means to provide description about the Job’s purpose.
Constraints on comment are:
– 0 to 32 alphanumeric and symbol characters can be used.
– Symbols that are not grayed out can be used.
1. Insert a comment.
For information on character input operation, refer to chapter 1.13.
2. Press {ENTER}.
To finish the setting, press the {Create Job}.
NOTE
Up to 10000 instructions can be registered per JOB.
(Including “Start Job” and “End Job”, line 1 to 10000).
89 of 493