4 Teaching
4.5 Editing Job
4-38
HW1485509
HW1485509
4.5.3 Display Menu
Press the {Display} to bring up the Display Menu. This menu can be
used to change various settings that relate to the Job Contents view.
Fig. 4-15: Display Menu
The following settings can be changed:
4.5.3.1 Display Classic View
When the {Classic} option is turned on, the original short-form INFORM
language will be displayed on the Job Contents view. Classic INFORM is
the language used in the YRC1000 Programming Pendant. For more
information on the difference between Detail INFORM and Classic
INFORM, refer to “YRC1000/YRC1000micro SUPPLEMENTAL
INSTRUCTIONS FOR Smart Pendant (HW1485511)”. Display Classic
View can be turned ON / OFF during both MANUAL (TEACH) and
AUTOMATIC (PLAY) mode.
Fig. 4-16: Detail INFORM (with Classic View OFF)
Fig. 4-17: Classic INFORM (with Classic View ON)
4.5.3.2 Display Tool Number
When {Tool #} option is turned on, the tool number will be displayed on the
Job Contents view. It displays next to the line number in [ ]. {Tool #} can be
turned ON / OFF during both MANUAL (TEACH) and AUTOMATIC
(PLAY) mode.
Fig. 4-18: Display Tool Number (when Display Tool # is ON)
To Next Page
Loading...
