YASKAWA YRC1000 - 1.17.2 Default Security Level Passcodes; 1.17.3 Security Level Access Information

1 Smart Pendant
1.17 Security Level Setting
1-33
HW1485509
HW1485509
1.17.2 Default Security Level Passcodes
Operation in Edit, Management, and Safety level require a passcode.
The default passcodes for each security level are:
– Editing: 000000000000000 (all 0s' - 16 digits)
– Managing: 9999999999999999 (all 9s' - 16 digits)
– Safety: 5555555555555555 (all 5s' - 16 digits)
Passcodes for Edit and Management levels can be customized. For
details, refer to chapter 1.17.5 “Security Level Settings”.
1.17.3 Security Level Access Information
Various security levels with varying levels of system access are
supported. These are summarized below:
NOTE
• In some regions, the YRC Controller may be shipped
with a randomized Safety passcode, included with the
shipment.
• When entering all the same digit, the numeric key can
be held to automatically repeat to the maximum of 16
digits.
Table 1-4: Security Mode
Items Lowest Accessible
Security Level
View System Status & Runtime Operation
Jog Robot Operation
Start/Stop Jobs Operation
Simple System Reset / Repair Operation
Teach Points and Edit Robot Setting Edit
Edit Jobs and Variables Edit
Edit Machine/Robot Control Parameters Management
Edit Settings (System Time, Passcodes etc.) Management
Ability to Create System Backup Management
Safety Functions (FSU, PFL, Safety Logic) Safety
56 of 493