YASKAWA YRC1000 - 11.3.3.6 Add Relay

11 Safety Function
11.3 Safety Logic Circuit
11-23
HW1485509
HW1485509
 OFF Delay
Turn OFF signal after timer delay.
Up to four “Pulse” Outputs can be set.
<When setting the 300 msec to OFF Delay>
11.3.3.6 Add Relay
To add a new input relay, press {+} next to the input relay.
Or, press input relay, then press {+} on the input relay. New input relay will
be added at the corresponding position.
Add new input relay on the left side of the selected input relay.
Add new input relay on the right side of the selected input relay.
OFF DELAY time
Output
Safety logic output
300msec
1 2
3
1
2
355 of 493