YASKAWA YRC1000 - 12.3.2 IP Setting

12 Software Pendant
12.3 Connection Process
12-8
HW1485509
HW1485509
12.3.2 IP Setting
Change the IPv4 address of the computer to match the IP address of the
YRC Controller. The IP address of LAN2 of YRC Controller can be viewed
on the Smart Pendant as described in chapter 8.6 “Network”.
1. Enter “Network and Sharing Center” through the Control Panel
2. Click the “Change adapter settings” on the left and double click the
“Local Area Connection”.
3. In the Local Area Connection Properties window, choose “Internet
Protocol Version 4 (TCP/IPv4)”, and click “Properties”.
456 of 493