12 Software Pendant
12.4 Software Pendant Function
12-17
HW1485509
HW1485509
3. Enter the respective password for the target security mode.
The default password for the security mode are:
– Editing Mode: 0000000000000000 (16 digits of 0)
– Management Mode: 9999999999999999 (16 digits of 9)
– Safety Mode: 5555555555555555 (16 digits of 5)
12.4.3.2 Safety Logic Circuit Editing
The Safety Logic Circuit is used to design FSU/PFL function details and to
edit the logical relationship of various safety signals.
1. Change the security mode to Safety Mode, and the operation mode of
the Software Pendant to Teach Mode.
2. Select “SAFETY FUNC.” On the main menu, and then select
“SAFETY LOGIC CIRCUIT”.
To Next Page
Loading...
