13 External Memory Device
13.1 Memory Device
13-3
HW1485509
HW1485509
13.1.5 Inserting a USB Memory Stick in Smart Pendant
When inserting a USB memory stick always position the Smart Pendant
with its back side facing up. Hold the USB memory stick with its top
surface facing up, and insert it into the USB memory stick connector on
the bottom of the Smart Pendant.
Forcible insertion may cause damage to the USB memory stick or USB
connector.
After inserting the USB memory stick, be sure to close the cover of the
connector before starting operations.
13.1.6 Inserting a USB Memory Stick in the CPU Board (JANCD-ACP01)
Make sure to insert the USB memory stick in the right direction: Keep the
USB memory stick with its top surface to the right, and insert it slowly into
the connector on the CPU board.
Forcible insertion may cause damage to the USB memory stick or USB
connector.
Fig. 13-1: USB Memory Stick Inserting Place (YRC1000 CPU Board
JANCD-ACP01)
CAUTION
• Disconnect power to the YRC Controller before opening the YRC
Controller door.
Failure to observe this may result in electric shock.
To Next Page
Loading...
