7 Concurrent I/O (Input/Output)
7.8 I/O Allocation and EtherNet/IP Configuration
7-37
HW1485509
HW1485509
7.8 I/O Allocation and EtherNet/IP Configuration
The I/O Configuration screens can be used to perform the following
actions:
– View List of I/O Devices
– View I/O Allocation Data (i.e. what Input/Output Groups are used vs.
available)
– Add/Delete/Modify EtherNet/IP Adapters and Scanners
To access this screen, select {Menu} {System Settings} {I/O
Configuration}.
WARNING
Changing I/O Settings and Allocations can affect the operation of
peripheral devices. Make sure hardware is in safe state (e.g. no
payloads in Grippers) before modifying configuration.
• All Input/Output #s and Group #s in this section and on
these screens refer to the Universal Input/Output #s which
also correspond to the numbers used in Inform
commands. Thus, if a device is mapped to Starting Group
# 20, then the first byte of the device's mapping can also
be accessed by “DigitalOut OutputGroup#(20)”.
• If Concurrent I/O program has been changed from the
default, some I/O may be marked as unavailable. If using
a non-standard CIOPRG.LST file, use Software Pendant
for I/O Configuration.
To Next Page
Loading...
