YASKAWA YRC1000 - 11.3.3.8 Delete Line; 11.3.3.9 Move Relay; 11.3.3.10 Cancel Edit

11 Safety Function
11.3 Safety Logic Circuit
11-25
HW1485509
HW1485509
11.3.3.8 Delete Line
Press the line to select, then press {Trash Can} to delete the line.
– Selected line is deleted.
11.3.3.9 Move Relay
Press the input relay, and drag to move the input relay. An icon appears
to show where the relay will be placed when dropped.
11.3.3.10 Cancel Edit
To cancel the edit, press {CANCEL}. This reverts any current changes.
SUPPLE
-MENT
• Each line must have at least one line.
– If all the lines are deleted, the section is also deleted.
SUPPLE
-MENT
• Each line must have at least one input relay.
– If there are input relays in the line after moving the
relay, the line is also deleted.
• Each line must have at least one output relay.
– Because of this, output relay cannot be moved.
357 of 493