1 Smart Pendant
1.8 Smart Pendant Display
1-15
HW1485509
HW1485509
1.8 Smart Pendant Display
The Smart Pendant Display is a 10-inch color Touch Screen Display. The
layout of each screen is different; however, there are two main screen
layouts that will be described in this section:
– Job Layout
This is the active view when editing or running a job
– Configuration Layout
This is the active view when viewing or editing a configuration setting
such as Tools, User Frames, Zones, etc.
1.8.1 Job Layout
This is the screen that will be displayed after opening a job or selecting {JOG}
or {RUN} from the Home Screen. It is divided into four main display areas:
Status Bar
View status and access common actions such as {MENU} and {SERVO}.
Job Contents View
Contains the contents of the Current Job.
Basic job actions such as Teaching Positions, Copying/Pasting
operation, and editing instruction parameters can be performed.
Programming Panel
Contents will change based on Navigation Bar.
For example, the Robot Jog panel is shown in fig. 1-11 “Job Layout”.
Navigation Bar
Use this to change the content of the Programming Panel.
To Next Page
Loading...
