1 Smart Pendant
1.7 Display and Operating Elements
1-14
HW1485509
HW1485509
If contact output that interface with the Emergency Stop
button of the Smart Pendant is necessary, refer to
“YRC1000micro INSTRUCTION (RE-CTO-A222)” for the
section on “Safety Logic Circuit”.
PPESP signal, and other signals can be combined and
output to the functional safety board’s general purpose
outputs (FSBOUT 18).
In this case the Functional Safety option must be enabled
and the Expansion Safety I/O Board (JANCD-ASF32-E)
must be installed in the YRC Controller. Refer to
“YRC1000micro OPTION INSTRUCTIONS FOR
FUNCTIONAL SAFETY FUNCTION” (HW1484544) for
more information.
To Next Page
Loading...
