12 Software Pendant
12.3 Connection Process
12-9
HW1485509
HW1485509
4. Choose “Use the following IP address”, and change subnet mask to
the value shown on Smart Pendant as described in chapter 8.6
“Network”. For IP address of the PC, use the same first three values
as the YRC Controller. For the fourth value, select a number different
from the YRC Controller. For example, if the YRC Controller LAN2
network setting is:
YRC IP Address: 192.168.255.1
YRC Subnet mask: 255.255.255.0
The PC network settings should be as follows:
PC IP Address: 192.168.255.[2 to 254]
PC Subnet mask: 255.255.255.0
The last number of the IP address of the computer must be
different from the last number of the IP address of the
YRC1000 LAN2 and YRC1000micro LAN.
To Next Page
Loading...
