7 Concurrent I/O (Input/Output)
7.4 Monitoring I/O from Smart Pendant Interface
7-7
HW1485509
HW1485509
Group View
In Group View, the signals are displayed in groups of 8. ON status is
shown as a green circle, and OFF status is shown as a white circle. The
status is shown from 1 to 8 with a bit order reading from right to left. When
the group is selected on the left side, the status of each I/O number will be
displayed on the right side of the screen.
Fig. 7-2: I/O Group View
Go To an I/O Group Containing an I/O Number
1. Press the text field to the right of {Go To:}.
• The keypad will appear.
2. Enter the I/O number and press {Enter}.
• The view will go to the I/O group containing that I/O number and
highlight it.
Additional information about the selected group is displayed on the top
right of the screen. This information includes:
– GROUP: the group number of the inputs.
– INPUT: the 8 inputs within the specified group.
– TYPE: The input type as configured from the YRC Controller
– VALUE (DEC): the value of the group in decimal.
– VALUE (HEX): the value of the group is hexadecimal.
– Enable Toggle (for Outputs only): Output signals can be toggled with
toggle switches. When {Enable Toggle} checkbox is not checked,
the output toggle switch is disabled. When {Enable Toggle}
checkbox is checked, the output toggle switch is enabled for
individual outputs. This is shown in fig. 7-3 “Toggle Output from
Group View”.
To Next Page
Loading...
