7 Concurrent I/O (Input/Output)
7.5 I/O Detailed View
7-15
HW1485509
HW1485509
Accessing the I/O Detailed View from the Current Job Screen
1. Go to {MENU} {Current Job}.
2. Press {Digital I/O} in the lower left corner of the screen.
3. The I/O view will appear in the lower half of the screen.
4. To view the Inputs Detailed View, press {Inputs} or to view the Outputs
Detailed View, press {Outputs}.
5. Press and hold an I/O group row in the left panel for two seconds.
– The I/O Detailed View will appear in the right panel.
– The default number selected is one byte, the size of one I/O group.
6. To set the number of bytes selected, press {Number Selected} and
select {One Byte}, {Two Bytes}, {Three Bytes} or {Four Bytes}.
Fig. 7-10: I/O Detailed View from Current Job
To Next Page
Loading...
