ADTRAN Total Access 5000 - Log on to the Netvanta 838; CRAFT Port Login; Remote Access Login

Total Access 5000 Business Services Deployment Guide
4-20 65K510DEP08-1A
Log On to the NetVanta 838
AccessthemanagementandprovisioningfeaturesfortheNetVanta838productsby
CommandLineInterface(CLI)usingastandardDB‐9serialcabletoconnecttotheconsole
portlocatedontheunit.TheCLImayalsobeaccessedviaTelnetovertheInband
ManagementVLAN.
CRAFT Port Login
ToestablishCLIcommunicationwiththeproduct,completethefollowingprocedure:
1. ConnecttothecraftinterfaceusingaVT100terminalorPCwithVT100emulationsoft‐
wareconfiguredwiththefollowingparameters:
•Anybaudratefromthelistof9600,19200,38400,57600,or115200
•8databits
•Noparity
•1stopbit
•No
flowcontrol
2.Onceconnected,press
ENTER severaltimestoaccesstheCLI.
NOTE
Theaccountnameandpasswordarecasesensitive.Defaultaccountsare
ADMIN,READONLY,READWRITE,andTEST.Thedefaultpasswordfor
eachoftheseaccountsisPASSWORD.Theprivilegetochangepasswords,
accountnames,andprivilegesareincludedintheADMINaccount.
Remote Access Login
ToremotelyaccesstheNetVanta83 8,openatelnetsessiontotheIPaddressconfiguredinthe
bridgegroup.