ADTRAN Total Access 5000 - SNTP Provisioning; Provision SNTP; Disable SNTP

Total Access 5000 Business Services Deployment Guide
3-18 65K510DEP08-1A
SNTP Provisioning
Thissectiondetailsthefollowinginformation relatedtotheSimpleNetworkTimingProtocol
(SNTP)asusedontheTotalAccess5000 shelf:
•ProvisionSNTP
•DisableSNTP
•ViewSNTPStatus
Provision SNTP
Ifdesired,anSNTPservercanbeusedbytheTotalAccess5000togetitsdateandtime.Outof
thebox,SNTPisdisabled.ItisautomaticallyenabledonceanSN TPserverisdefined(i.e.it
attemptstoconnecttotheserveranduseit).SettingupSNTPhas
twosteps:
• DefiningtheSNTPserver(s)
• DefiningtheMSAPlocaloffsetfromGMT
ToprovisionSNTP,completethefollowingsteps:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtogettotheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
clock timezone WORD <-23-23> <0-
59>
,andpressENTERtosettheclocktimezone.
UsetheclocktimezoneWORD<‐23‐23><0‐59>commandtosetthenameofthetime
zone,thehoursoffset,andtheminutesoffsetfromtheUTC.
NOTE
TheWORDinputdesignatesthetimezone.Thisisonlyusefulforhuman
readability.
3. FromtheGlobalConfigurationprompt,type
ip sntp server A.B.C.D,andpress
ENTERtodefineanSNTPserver.If noserverwaspreviouslydefined,thiscommandalso
enablesSNTP.
4. Type
exit,andpressENTERtoreturntotheenableprompt.
Disable SNTP
TodisableSNTP, completethefollowing steps:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtogettotheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
no ip sntp server A.B.C.D,andpress
ENTERtodeleteallSNTPserversand,thus,disableSNTP.
NOTE
TheIPaddress(A.B .C.D)isoptional in thiscommandsincethereisonlyone
SNTPserverdefinedperTotalAccess5000.
3. Type
exitandpressENTERtoreturntotheEnableprompt.