Name: ADTRAN Total Access 5000
Brand: ADTRAN
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Total Access 5000 Business Services Deployment Guide

E-2 65K510DEP08-1A

Introduction

TheTotalAccess5000providestheabilitytoviewcountsofvarioustraffictypesthroughout

thesystemthatisnotgenerallyavailablebywayofthenormalperformancemonitoring

bucketsorcounters.Dynamiccountersallowtheusertosetupacountermonitoringtrafficas

itistransmittedto,orreceived

from,anyinterfaceintheTotalAccess5000orNetVanta.This

includesbackplane,EFMgroup,Ethernet,Gigabit‐Ethernet,andLinkAggregationinterfaces.

Inadditiontotheinterfacetobemonitored,theVLAN,VLANp‐bit,andcolorofthetraffic

canbespecified.

Ausercouldchoosetomonitoranygreen

trafficbeingreceivedonaparticularVLANfroma

specifiedEFMbondinggroup.Or,ausercouldchoosetomonitorredtrafficonaparticular

VLANbeingthrownawaybythepolicer.Onlyoneofeachfiltercanbespecified.For

example,twoVLANscannotbespecifiedforasingle

dynamiccounter.

Configure or Modify the Counter Profile for the Counter

Profilescanbeeditedtochangeanysavedcriteria.Toconfigureormodiftyacounterprofile,

completethefollowingprocedure:

1. FromtheEnableprompt,type

configure terminal,andpressENTERtoaccesstheGlo‐

balConfigurationprompt.

2. FromtheGlobalConfigurationprompt,setuponemorecounterprofilesoranenteran

existingcounterprofilebytyping

counter-profile <shelf/slot/index>,andpress

ENTER.

Counterprofilesarenotglobal.Eachprofilebelongstoashelf/slot.Profilesareusedto

specifyvariousfiltersforthecounter.

3. Asdesired,typeeachofthefollowingtoconfigurethetypeoftraffictobespecifiedby

thecounterprofile.Createthefilterforthetraffictypetobemonitored:

•Type color <color>,andpressEntertospecifyatrafficcolortype.Validvaluesare

green,yellow,andred

•Type

pbit <p_bit_value>,andpress EntertospecifytheS‐tagprioritybitvalue.Valid

valuesare0‐7

•Type

vlan <VLAN>,andpressEntertospecifytheS‐tagvaluetobemonitored

Theprofileiscompleteatthispoint.

4. Type

exit,andpressENTERtoreturntotheGlobalConfigurationprompt.

5. FromtheGlobalConfigurationprompt,type

dynamic-counter <shelf/slot/

index>

,andpressENTERtoaccesstheDynamic‐CounterConfigurationprompt.

6. FromtheDynamic‐CounterConfigurationprompt,type

set counter-profile

<shelf/slot/index> [exclude|include]

,andpressENTERtospecifythecounter‐

profiletobeusedbythedynamiccounter.

Useincludetocountpacketsthatmatchthecounter‐profile.Useexcludetocountpackets

thatdonotmatchthecounter‐profile.

7. FromtheDynamic‐CounterConfigurationprompt,assignaninterface tothecounterby

typing

set interface <interface_type> <shelf/slot/port> <traffic

direction>

,andpressENTER.

Validinterfacetypesarebackplane,efm‐group,ethernet,gigabit‐ethernet,andlag‐

group.Thetrafficdirectionspecifieswhetherthedynamiccountershouldbemonitoring

trafficbeingtransmittedto(tx)orreceivedfrom(rx)theinterface.

ADTRAN Total Access 5000 Specifications

Interfaces

craft interface	DB-9 RS-232 Electrical Interface (Async)
admin interface	DB-9 RS-232 DTE Electrical Interface (Async with Modem Control Signals)
network management port	DB-9 RS-232 DTE Electrical Interface (Async)
ethernet interface	10Bt
external alarm inputs	16

Operating Environment