ADTRAN Total Access 5000 - Central Office Terminal (COT) Provisioning; Provision the GE 4-Port Line Module; Provision the GE 4-Port Line Module Administration Status; Table J-2. GE 4-Port Line Module Administration States

Total Access 5000 Business Services Deployment Guide
J-2 65K510DEP08-1A
Central Office Terminal (COT) Provisioning
ToprovisiontheCOTNode,completethef o llowing:
•ProvisiontheGE4‐PortLineModule
Formoreinformation,referto“ProvisiontheGE4‐PortLineModule”onpage J‐2.
•ProvisiontheDS3UnchanelizedEFM4‐PortLineModule
Formoreinformation,referto“ProvisiontheDS3UnchannelizedEFM4‐PortLine 
Module”
onpage J‐4.
•ProvisiontheT18‐PortLineModule
Formoreinformation,referto“ProvisiontheT18‐PortLineModule”onpage J‐6.
Provision the GE 4-Port Line Module
Thissubsectiondetailsthefollowing information:
•ProvisiontheGE4‐PortLineModuleServiceState
•ProvisiontheNetworkPorts
•ProvisiontheEthernetStar
•ProvisionforRedundancy
Provision the GE 4-Port Line Module Administration Status
TableJ‐2displaysthethreeadministrationstatesandshowstheequivalentServiceStatefrom
priorreleases.
Tosetthemoduleadministrationstate,completethefollowing:
1. FromtheTotalAccess5000Mainmenu,select
System CLI,andpressENTER.
2. FromtheCLImenu,select
CLI Command Entry,andpressENTER.
Thefollowingresponseiddisplayed:
Use EXIT to exit CLI session.
3. SelectYtoentertheCLIcommandinterface.
4. LoginagainusingthedefaultADM IN andPASSWORDoptions.TheCLIpromptis
displayed.
Table J-2. GE 4-Port Line Module Administration States
Command Previous Description
no shutdown
InService
Inthe
no shutdownstate,traffic
passesandalarmsaregenerated.
shutdown maintenance
OutofService,Main‐
tenance
Inthe
shutdown maintenance
state,trafficpassesbutnoalarmsare
generated.
shutdown
OutofService,Unas‐
signed
Inthe
shutdownstate,notraffic
passesandnoalarmsaregenerated.