ADTRAN Total Access 5000 - Table I-15. T3 Interface Defaults

Appendix I, 5.1 Provisioning Defaults - Total Access 5000 Provisioning Defaults
65K510DEP08-1A I-9
thresholdsses‐p24‐hour 0
thresholdsuas‐p24‐hour 0
thresholdscv‐p24‐hour 0
testtimeout 1440
testtimeoutremaining 0
test‐pattern QRSS
test‐patternnosync Enabled
loopbacklocalline Enabled
remote‐loopbackCSU Enabled
remote‐loopbackFDL Enabled
Table I-15. T3 Interface Defaults
Provisioning Option Default Setting
description ““
shutdown Disabled‐OutofServiceUnassigned
framing C‐Bit
loopbacklocalline Enabled
loopbackremote Disabled
remote‐loopback Enabled
test‐pattern P223
timeoutloopback 1440
thresholdses‐l15‐minute 0
thersholdscv‐l15‐minute 0
thresholdsesp‐p15‐minute 0
thresholdscvp‐p15‐minute 0
thresholdssescp‐p15‐minute 0
thresholdscvcp‐p15‐minute 0
thresholdssas‐p15‐minute 0
thresholdsuasp‐p15‐minute 0
thresholdses‐l24‐hour 0
thersholdscv‐l24‐hour 0
thresholdsesp‐p24‐hour 0
Table I-14. T1 Interface Defaults (Continued)
Provisioning Option Default Setting