ADTRAN Total Access 5000 Deployment Guide

Appendix I, 5.1 Provisioning Defaults - NetVanta 80/8000 Provisioning Defaults
65K510DEP08-1A I-21
NetVanta 80/8000 Provisioning Defaults
ToviewthecurrentprovisioningsettingsforSystemRelease5.1,completethefollowingsteps:
1. FromtheNetVanta838Rootprompt,type
enabletoaccesstheEnableprompt,and
press
ENTER.
2. FromtheEnableprompt,type
show run configtodisplaythelistofcurrent
provisioningsettings,andpress
ENTER.
3. Refertothetablesbelowtoviewthefactoryprovisioningdefaults.
Table I-33. Operational Modes Defaults
Provisioning Option Default Settings
shdslmode NTU
ds3mode NTU
ipdefault‐gateway 0.0.0.0
ipfile‐serverdefaulthost 0.0.0.0
ipfile‐serverdefaultfilename ““
linetimeout 15
clocktimezone Name‐““;
HoursOffset‐0:
MinutesOffset‐0
Table I-34. AAA Defaults
Provisioning Option Default Settings
aaaauthenticationlogindefault Local
aaaauthenticationeep Enabled
aaaauthorizationcommands1default None
aaaauthorizationcommands15default None
aaaauthorizationconfig‐command Enabled
aaaauthorizationexecdefault None
aaaaccountingcommands1default None
aaaaccountingcommands15default None
aaaaccountingexecdefault None
aaaaccountingupdateperiodic 5
Table I-35. SHDSL Timeout Training Default
Provisioning Option Default Settings
shdsltimeouttraining 60

ADTRAN Total Access 5000 Specifications

Interfaces

craft interface	DB-9 RS-232 Electrical Interface (Async)
admin interface	DB-9 RS-232 DTE Electrical Interface (Async with Modem Control Signals)
network management port	DB-9 RS-232 DTE Electrical Interface (Async)
ethernet interface	10Bt
external alarm inputs	16

Operating Environment

operating temperature	-40°C to +65°C
storage temperature	-40°C to +70°C
relative humidity	Up to 95%, non-condensing

Weight and Dimensions

height	9.25 in.
width	0.08 in.
depth	9.5 in.
weight	0.6 lbs.