ADTRAN Total Access 5000 - Disable Network Interfaces

Total Access 5000 Business Services Deployment Guide
A-8 65K510DEP08-1A
Disable Network Interfaces
TodisableanyunusedSMGigabit‐Ethernetports:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,type
interface gigabit-ethernet
<shelf/slot/port>
,andpressENTERtoaccessthelaggroupconfigurationprompt.
3. FromtheGigabitEthernetInterfaceConfigurationprompt,type
shutdown,andpress
ENTERtosettheinterfacetoOutofService,Unassigned.
4. Repeatsteps2to3todisableadditionalgigabit‐ethernetinterfaces
5. FromtheGigabitEthernetInterfaceConfigurationprompt,type
end,andpressENTERto
returntotheEnableprompt.