ADTRAN Total Access 5000

To Next Page

To Previous Page

Total Access 5000 Business Services Deployment Guide

3-4 65K510DEP08-1A

5. Ifdesired,typesnmp-server chassis-id-tid-synctoenableTID/SysNameSync,

andpress

ENTER.

NOTE

•TheTID/SysNameSyncprovisioningisasettingthatforcestheTL1TID

andSNMPSystemNametobeidentical.IfSyncisenabled,achangetoone

ofthesesettingsforcestheothertobechangedaswell.

•IftheTID/SysNameSyncisenabled,itconvertsthesystemnameto

allcaps

andtheonlyspecialcharacterallowedis“_”.

Set the TID

TosettheTargetIdentifier(TID),completethefollowingprocedure:

1. FromtheGlobalConfigurationprompt,type

tl1,andpressENTERtoaccesstheTL1Con‐

figurationprompt.

2. FromtheTL1Configurationprompt,type

tid WORD,andpressENTERtosettheTID.

NOTE

TheTIDnameisenter e dusingupto20alpha‐numericcharact ersbeginning

withalettercharacter.TheTIDnamemustbeuniqueandnotduplicatethe

NetworkName.

3. Type

end,andpressENTERtoreturntotheEnableprompt.

ADTRAN Total Access 5000 - Set the TID