ADTRAN Total Access 5000 - Shut the Counter down

Appendix E, Dynamic Counters Provisioning - Configure or Modify the Counter Profile for the Counter
65K510DEP08-1A E-3
8. FromtheDynamic‐CounterConfigurationprompt,typeno shutdown,andpressENTER
enablethecounter.
9. Type
exit,andpressENTERtoreturntotheGlobalConfigurationprompt.
Shut the Counter Down
Therearetwomethodstoshutdown anexistingcounter.
Thefirstmethodistotype
no dynamic-counter <shelf/slot/index>,andpressENTER.
Thesecondmethodtodeleteanexistingcounterisdescribedinthefollowingprocedure:
1. FromtheEnableprompt,type
configure terminal,andpressENTERtoaccesstheGlo‐
balConfigurationprompt.
2. FromtheGlobalConfigurationprompt,enteranexistingcounterprofilebytyping
counter-profile <shelf/slot/index>,andpressENTER.
3. FromtheCounter‐ProfileConfigurationprompt,type
shutdown,andpressEnter.