ADTRAN Total Access 5000 - EFM Bonding Group Example

Total Access 5000 Business Services Deployment Guide
6-8 65K510DEP08-1A
EFM Bonding Group Example
TheexamplebelowcreatesabondinggroupontheDS3EFM3‐Portwhichincludesslot1, 
ports3and5,thendisplaysthegroupstatus.
NOTE
Ifthereisa problemwiththecreatio nofthegroup,anerro rmessagewill
followthecreatecommand.Otherwise,itissuccessfulifnoerro rmessage
followsthecommand.
TA5000# application
TA5000(app)# ez-efm 1
TA5000(app-ez-efm 1)# create my_bonding_group link 16/3:1-3:8
upstream 5000 downstream 5000 active-links-minimum 1
Done
TA5000(app-ez-efm 1)# exit
TA5000(app)# exit
TA5000# show interfaces efm-group
EFM Group 1/1/2 {MY_BONDING_GROUP} is ENABLED and UP
Provisioned Links : 1/3,1/5
Active Links : 1/3,1/5
Inhibited Links : None
UpStream Data Rate : 5120
DownStream Data Rate : 5120
Loopback : Disabled
XCV Threshold : 1e-7
XCV Link Removal : Enabled
TA5000#