ADTRAN Total Access 5000 - Log on to the Netvanta 8044; CRAFT Port Login; Remote Access Login

Total Access 5000 Business Services Deployment Guide
7-8 65K510DEP08-1A
Log On to the NetVanta 8044
AccessthemanagementandprovisioningfeaturesfortheNetVanta8044productsby
CommandLineInterface(CLI)usingastandardDB‐9serialcabletoconnecttotheconsole
portlocatedontheunit.TheCLImayalsobeaccessedviaTelnetovertheInband
ManagementVLAN.
CRAFT Port Login
ToestablishCLIcommunicationwiththeproduct,completethefollowingprocedure:
1. ConnecttothecraftinterfaceusingaVT100terminalorPCwithVT100emulationsoft‐
wareconfiguredwiththefollowingparameters:
•Anybaudrate
•8databits
•Noparity
•1stopbit
•Noflowcontrol
2.Onceconnected,press
ENTER severaltimestoaccesstheCLI.
NOTE
Theaccountnameandpasswordarecasesensitive.Defaultaccountsare
ADMIN,READONLY,READWRITE,andTEST.Thedefaultpasswordfor
eachoftheseaccountsisPASSWORD.Theprivilegetochangepasswords,
accountnames,andprivilegesareincludedintheADMINaccount.
Remote Access Login
ToremotelyaccesstheNetVanta8044,openatelnetinthemanagementVLANthatwassetup
inthesubtendedhostconfiguration.