ADTRAN Total Access 5000 - Table I-25. Power Shedding Defaults; Table I-26. System Alarm Defaults

Appendix I, 5.1 Provisioning Defaults - Total Access 5000 Provisioning Defaults
65K510DEP08-1A I-15
Table I-25. Power Shedding Defaults
Provisioning Option Default Setting
activation‐delay 5
alarm External‐input1
deactivation‐delay 1
shutdown Disabled‐OutofServiceUnassigned
scrmode Auto
scrschedule Disabled
snmp‐serveralarmenable Authenticate‐failure
snmp‐serverchassis‐id ʺTA5000ʺ
snmp‐servercommunityread‐only ʺPublicʺ
snmp‐servercommunityread‐write ʺPrivateʺ
snmp‐servercontact ʺwww.adtran.comʺ
snmp‐serverenabletraps Enabled
snmp‐serverlocation ʺSysLocationnotsetʺ
snmp‐servernon‐vol‐card‐status Disabled
alarmenablering‐generator Enabled
alarmenabledownstream‐node Enabled
alarmenablebandwidth‐unavailable Enabled
alarmenableinternal‐system‐s‐tag Enabled
alarmenablenode‐number Enabled
alarmenableduplicate‐node‐number Enabled
alarmenablepower‐limit Enabled
alarmenableduplicate‐scm‐ip Enabled
Table I-26. System Alarm Defaults
Provisioning Option Default Setting
alarmaidexternal‐input1 1
alarmaidexternal‐input2 2
alarmaidexternal‐input3 3
alarmaidexternal‐input4 4
alarmaidexternal‐input5 5
alarmaidexternal‐input6 6
alarmaidexternal‐input7 7