ADTRAN Total Access 5000 - Page 143

Section 5, BSM Provisioning - Provision the Line Module
65K510DEP08-1A 5-5
2. FromtheGlobalConfigurationprompt,provisionthemoduleadministrationstateby
performingoneofthefollowingcommands:
•Type
no slot shutdown <shelf/slot>,andpressENTERtotakeaslotInService
•Type
slot shutdown maintenance <shelf/slot>,andpressENTERtotakeaslot
OutofServiceMaintenance
•Type
slot shutdown <shelf/slot>,andpressENTERtotakeaslotOutofService,
Unassigned
3. FromtheGlobalConfigurationprompt,type
interface t3 <shelf/slot/
port:channel>
,andpressENTER.
4. FromtheT3InterfaceConfigurationprompt,type
description LINE,andpressENTER
toconfiguretheCircuitID.
5. FromtheT3InterfaceConfigurationprompt,type
framing [cbit|m23],andpress
ENTERtoselecttheframingmode.
6. FromtheT3InterfaceConfigurationprompt,provisiontheT3portadministrationstate
byperformingoneofthefollowingcommands:
•Type
no shutdown,andpressENTERtotakeaportInService
•Type
shutdown maintenance,andpressENTERtotakeaportOutofService‐Mainte‐
nance
•Type
shutdown,andpressENTERtotakeaportOutofService‐Unassigned
7. Repeatsteps3‐6foreachDS3portthatneedstobeprovisioned.
8. FromtheT3InterfaceConfigurationprompt,type
exit,andpressENTERtoreturntothe
GlobalConfigurationprompt.
9. FromtheGlobalConfigurationprompt,type
interface t1 <shelf/slot/port>,and
press
ENTER.
10. FromtheT1InterfaceConfigurationprompt,type
description LINE,andpressENTER
toconfiguretheCircuitID.
11. FromtheT1InterfaceConfigurationprompt,type
framing [d4|esf],andpressENTER
toselecttheframingmode.
12. FromtheT1InterfaceConfigurationprompt,provisiontheT1portadministrationstate
byperformingoneofthefollowingcommands:
•Type
no shutdown,andpressENTERtotakeaportInService
•Type
shutdown maintenance,andpressENTERtotakeaportOutofService,Mainte‐
nance
•Type
shutdown,andpressENTERtotakeaportOutofService,Unassigned
13. Type
end,andpressENTERtoreturntotheEnableprompt.