Avaya 4526FX - Displaying Ipv6 Interface Addresses

show ipv6 interface
Enter show ipv6 interface.
Job aid
The following graphic shows the results of the show ipv6 interface command.
Displaying IPv6 interface addresses
View IPv6 interface addresses to learn the addresses.
Prerequisites
Log on to the User EXEC mode in
ACLI.
Display IPv6 interface addresses
Use the following command to display IPv6 interface addresses:
show ipv6 address interface [vlan <1-4094> | <WORD 0–45>]
Variable definitions
The following table list the variables and definitions.
System configuration using ACLI
116 Configuration — System April 2011